Full Specification of upcoming Fuji-X-T1 surfaced over the web, take a look below (translated via google)
– Sensor 16.3 million pixel X-Trans CMOS II sensor-active (APS-C)
– Image processing engine EXR Processor II
– 0.5 second start-up time. AF 0.08 seconds. 0.05 second shutter lag. 0.5 seconds shooting interval
– Continuous shooting up to 8 frames / second with AF tracking
– Media SD / SDHC / SDXC. In UHS-II support, and cut in half the time of writing RAW
– EVF 236 million pixels organic EL 0.5-inch. Magnification 0.77 times. Eye point 23mm.
– Time lag of EVF is 1/10 of the conventional 0.005 seconds
– Structure of dust and water sealing 80 points. Low-temperature performance of -10 degrees
– The body is die-cast magnesium. Dial is machined aluminum.
– ISO sensitivity (ISO100, ISO12800, ISO25600, ISO51200 extended) ISO200-6400
– LCD monitor 1.04 million dot 3.0-inch tempered glass use. Aspect ratio 3:2
– The shutter speed 30-1/4000 seconds. Sync speed is 1/180 sec
– Video 1920×1080 60p/30p, MOV, H.264
– Film simulation
– NP-W126, battery can record up to 350 sheets of standard CIPA
– Size: 89.8mm x 46.7mm depth height 129.0mm x width
– Weight: (excluding battery and media) 390g
– Kit lens XF 18-55mm F2.8-4 R LM OIS
– Vertical position Battery Grip VG-XT1 is also available
STAY WITH ON FACEBOOK | TWITTER | GOOGLE+ to get live news + Fuji rumors 24X7.
src-digicame-info