GXR Third Function-enhancing Firmware
< Enhanced Functions for All Camera Units >
- Addition of the “Scene Mode” for photographic expression with a difference
- The addition of the new “Scene Mode” provides 5 types of mode to expand your photographic expression. Choose from “Soft Focus”, “Cross Process”, “Toy Camera”, “Miniaturize”, and “High Contrast Monochrome”. Simply press the shutter release to take a truly unique shot.
- Addition of “Target Follow Function” to AE/AF target movement function
- The “Target follow function” is added to the target movement function that locks the exposure or focus on a specific part of the photographic subject. When the camera follows the subject, this function automatically continues to adjust to the target position, so that the subject is in focus at precisely the moment you want to shoot.
- “Reset/Cancel” function added for AE/AF target move
- By pressing the cancel button during AE/AF target move, the image monitor returns to the central position. When the cancel button is pressed again, the target move mode is cancelled.
- “Magnified playback function” added that magnifies the center of the target moved position
- When magnifying the playback screen, the center of the position moved to as the AE/AF target can be the center of the magnification
< Enhanced function only for the GR LENS A12 28mm/GR LENS A12 50mm camera unit >
- Exposure correction and white balance can be assigned to the zoom button.
- In the key custom settings, exposure correction or white balance functions can be assigned to the zoom button.
Click here to Download the firmware update
GR DIGITAL III Fourth Function-enhancing Firmware
< Enhanced Functions >
- Addition of Target Follow AF Function
- By half-pressing the shutter button and following the set subject, this function continues to adjust to the subject position so that the subject is in focus at precisely the moment you want to shoot.
- Addition of “AF/Target Follow AF” switching function to the Fn. button
- “AF/Target Follow AF” is added as one of the functions that can be registered to the Fn (function) 1 or Fn2 button. If the focus method is set to “multi AF”, “spot AF”, or “Target follow AF”, the focus method can be switched between “multi AF” and “Target follow AF”, or between “Spot AF” and “Target follow AF”.
- Addition of setting change function to ADJ. lever for scene mode
- When shooting in a scene mode such as “dynamic range double shot”, “cross process”, or “high contrast monochrome”, the new function enables the ADJ. lever to be used to change settings such as ISO sensitivity and image quality.
- Addition of a selection function to the white balance manual setting capture area
- When setting the white balance manually, the capture area used as the standard for white balance can be selected from “Entire frame” or “Spot”.
- Electronic level display for self-timer
- When using the self-timer, the electronic level continues to be displayed after the self-timer is started.
